|
|
|
| |
Selecting the correct conformal coating material and blend is possibly the MOST important decision that must be made by the production, quality and commercial team, in the whole coating process.
This decision impacts on the protective quality of the board (as 2 Acrylic material manufacturers will not make equal quality of material), the application method and the drying / curing parameters that must be followed (time).
A Questionnaire that will assist you to select your own Correct Material Selection is available from Amtest upon request.
The Amtest partner for conformal coating material is HumiSeal.
Their policy of quality first, enables that the material is both offering first class protection and ease of application. All material is fully supported by Amtest process engineers.
 |
Humiseal has over 50-years experience |
|
Widest range of Material; Acrylic, Urethanes, Silicones and ER |
|
Qualified coatings that meet the most exacting standards: MIL-I-46058C, IPC-CC830, IEC 60664-3, IEC 61086 and UL-746E recognized. |
|
Products formulated to your process needs via multiple cure types: Ambient (air-dry), Heat, Moisture, Oxygen and UV. |
|
Ease of application: Brush, Dip, Atomized Spray, Select Coat and Swirl Coat. Environment-friendly coatings: Classic, Low VOC. Ultra Low VOC and VOC/HAPS Free |
Conformal coating material is manufactured within the EC and locally stocked in the Amtest territories.
In addition their Company policy of regular visits to Central and Eastern Europe by the Chief Chemists of Humiseal ensures that any process improvements can be dealt with on an one to one basis all of which is supported by Amtest process engineers.
HumiSeal also offer a free of charge service to coat your boards with the selective coating equipment that is located in their laboratory in England.
|
|
|
|
