|
 |
|
 |
| SMT NUREMBEG, GERMANY |
SMT NUREMBEG, GERMANY
June 8th – June 10th 2010
|
| |
|
|
 |
 |
|
|
| 5.4.2010 |
Amtest is glad to welcome to the Team,
Robert Brożyna
Robert is an electronics engineer with 4-years high level experience with the SMT process and will be located in Lower Silesia, Poland
József Sebestyén
József is a sales specialist with 6 years of SMT application and soldering process experience. He will be located in our Budapest office.
Istvan Harkai
Istvan is an electrical engineer with 4-years experience with AOI systems. He will be located in our Budapest office.
|
| |
|
|
|
|
|
| |
75 years of specialized experience have placed JBC in the technological forefront for soldering equipment and tools. Innovation, efficiency and reliability are the key features of its wide range of products that have been designed to satisfy the most demanding professional needs.
High technology, superior quality.
JBC has a continuing product improvement and development programme. This has resulted in its Research and Development Department creating the most innovative soldering technologies, like the Advanced Series introduced in this catalogue.
The exclusive and new JBC microprocessor driven heating system ensures such a fast heat recovery that it enables performing at lower temperatures than before and improving a 80% the efficiency of the station.
ADVANCED serie introduces the new modular stackable concept of the single units in order to make a multifunctional station set. We invite you to discover their outstanding performance for yourself. You can also contact any of our distributors who will be able to help you. Structure of the soldering system. In order to offer the highest flexibility and to adapt the system to the task, the Advanced series is divided into modules that are supplied independently
 |
Control units |
|
Iron handpiece models |
|
Hot tweezers |
|
Cartridge range |
|
Independent stands |
| |
Precompiled kits are also available. |
By controlling the heat, we improve quality.
The Advanced technology gives an 80% improvement over the performance of the best soldering stations available in the market. In the following graphs, based on practical tests, we show this superiority.
 |
Time to reach 350 ° C
A conventional station takes between 10 to 90 seconds to reach 350 ° C. Any advanced station with a 2210 hand piece reaches this temperature in only 2 seconds. These gives an idea of response capability of the Advanced system. |
|
Process for 3 solder joints
In this graph we can observe the temperature evolution and the time taken to preform the same series of three solder joints. While a conventional station suffers a temperature drop of 70° C and the time taken is 12 seconds, the Advanced station drops down only by 30 ° C and completes the task in half the time: only six seconds. |
Technical advices / features
NEW AND REVOLUTIONARY TECHNOLOGY
The exclusive JBC heating system achieves a high heating power in a very small size cartridge.This means that the mass to be heated is minimal and therefore the thermal inertia is also minimal. In addition, the system is provided with a high sensitivity temperature sensor element integrated within the resistance for optimum performance- instant temperature recovery, maximum power, and minimum temperature fluctuations. The sensor-resistance set is shielded to make it indestructible.
ERGONOMICS AND USABILITY IN A HIGH PRECISION SYSTÉM
The Advanced soldering irons are currently the lightest, smallest and most ergonomic handpieces available, offering the shortest tip-to-handle distance and a higher working performance.
OUTSTANDING TIP-LIFE: LASTS UP TO FIVE TIMES LONGER
As soon as the soldering iron is left on the stand, the tip temperature automatically drops to 250 oC, decreasing the wear on the tip, resulting in a working life three to five times longer than that of a conventional tip. When the soldering iron is taken out of the stand again, the tip temperature is instantaneously recovered.
LOW-TEMPERATURE SOLDERING: MINIMUM RISK OF DAMAGE, EVEN FOR LEAD-FREE SOLDERING
In comparison with conventional stations, soldering at 450oC, the Advanced series allows soldering at much lower temperatures with a maximum of 370oC.Thanks to its fast temperature recovery system, it eliminates the risk of damaging the components by applying excessive heat and therefore optimising the process quality.
TWO SOLDERING IRONS IN ONE: PRODUCTIVITY INCREASE
The cartridge extractor system in the stand and the instant heat response enable switching cartridge models without interrupting work, resulting in multiple soldering irons in one.
EASY CALIBRATION
Since the Advanced technology is based on a microprocessor drive, it is not necessary to recalibrate any of the Advanced Stations but, if required, calibration of the soldering tips can easily be done thanks to the TI 2800 Thermometer and the AC 2600 Console.
|
|
|
|
